Rochester Hills Electrical Company handles electrical work for homeowners, landlords, property managers, and commercial clients across Rochester Hills and the wider Oakland County area. From a tripping breaker to a full panel upgrade, from a single outlet to a whole-home rewire, the work gets scoped on the call before anything is scheduled. Fast diagnosis. Pricing set out up front. Clean work.
We're available every day from 9 AM to 8 PM. Call to ask what the schedule allows, get a price for the work, and confirm a time that fits.
Dealing with a tripping breaker or a dead outlet? Those symptoms point to a handful of common causes: loose connections, an overloaded circuit, a wiring fault behind the wall, or a breaker that has reached the end of its service life. A diagnostic visit works through the likely causes in order, starting with what the panel shows and moving to the affected circuit from there.
GFCI outlets that won't reset, lights that flicker when a large appliance runs, and rooms that lose power without a clear reason all fall into the same category. The fix depends on what the circuit reveals once it's properly tested. We check the outlet, the wiring run, the breaker, and the load on that circuit before calling a cause. AFCI protection issues on bedroom circuits follow a similar process: test first, confirm the fault, then address it with the right fix for that wiring configuration.
You get a clear explanation of what was found and what the repair involves before any work starts. We're ready to get your circuits working again.
An aging breaker panel is one of the more common reasons a Rochester Hills home runs into repeated electrical problems. Panels that were sized for the electrical load of a few decades ago weren't designed to carry EV chargers, home offices, large kitchen appliances, and the rest of a modern household's demand. When breakers trip regularly, when the panel is full with no room to add circuits, or when a major appliance or charger installation requires more capacity than the current service provides, a panel upgrade is usually the right path forward.
A service upgrade starts with a load calculation: what the home currently draws, what new circuits will add, and what service size will carry it comfortably with room to grow. We handle the panel replacement and the service entrance work, and where a subpanel is the right answer for a detached garage or a new addition, that's part of the same conversation. Panel and wiring work finished to code is the standard, not an upgrade.
We'll take care of the circuits from here.
Oakland County's housing stock spans a wide range of ages, and the wiring inside an older home tells that story clearly. Knob-and-tube wiring, common in homes built before the mid-twentieth century, lacks a ground conductor and wasn't designed for the loads a modern household puts on it. Aluminum branch-circuit wiring, installed widely in the late 1960s and into the 1970s, expands and contracts differently from the devices it connects to, and those connection points are where problems develop over time.
You're talking to someone who knows the area and the homes in it. When a Rochester Hills home still has knob-and-tube or aluminum branch wiring, the conversation starts with what's actually there: how much of the original wiring remains, which circuits are affected, and what a remediation or full rewire involves room by room. A whole-home rewire replaces the wiring runs, the outlets, the switches, and the panel connections, and the result is a system that meets current code and carries a modern load without the risks the old wiring carried.
We'll make your wiring safe again.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a clear scope of the work and a price before anything is scheduled. Outlet and switch work covers a wide range of jobs. Adding an outlet to a room where there isn't one, replacing a standard outlet with a GFCI or AFCI model, installing a dimmer switch, or running a new circuit to a part of the house that needs more capacity are all straightforward jobs once the wiring path is confirmed.
Lighting installation follows the same pattern. Recessed LED lighting requires opening the ceiling, running the wiring to a switch, and setting the fixtures level and evenly spaced. Exterior lighting and security lighting involve weatherproof fixtures and, in some cases, a dedicated circuit depending on the load. Under-cabinet lighting in a kitchen is often tied into an existing circuit, but the right approach depends on what that circuit is already carrying.
Ceiling fan installation includes the wiring, not just the fixture. Where a ceiling box is already in place and wired for a fan, the job is straightforward. Where there's a light fixture but no fan-rated box and no separate switch for the fan motor, the wiring work is part of the install. Electrical service scheduled without the runaround is how it should go, and that's how we work.
The electrical demand on a Rochester Hills home has shifted considerably as EV ownership grows, home offices become permanent, and large appliances pull more load than older wiring was sized for. A Level 2 EV charger requires a dedicated 240-volt circuit run from the panel to the garage or driveway, sized for the charger's amperage rating. That circuit gets added to the load calculation, and if the panel doesn't have the capacity, the panel conversation and the charger conversation happen together.
Dedicated circuits for major appliances work the same way. A refrigerator, a chest freezer, a washer, or a large kitchen range all perform better and place less stress on the system when they're on their own circuit rather than sharing with other loads.
Backup generator hookups involve a transfer switch installed at the panel, which allows the generator to power selected circuits without back-feeding the utility line. The transfer switch is the critical piece: it isolates the home's system from the grid when the generator is running. Whole-home surge protection is installed at the panel as well, and it protects the entire electrical system from voltage spikes that come in through the service entrance. We'll sort the wiring and clean up after.
The wiring around here has its own patterns, and an electrical safety inspection is the clearest way to understand what a home's system actually contains. Inspections are common before a property sale, after purchasing an older Rochester Hills home, following storm damage, or when a homeowner wants a baseline understanding of a system that hasn't been looked at in years.
An inspection covers the panel, the visible wiring, the outlets and switches, the grounding system, and any obvious code concerns. What it turns up shapes the conversation about what work, if any, is worth scheduling. Hardwired smoke detector installation is a common follow-on to an inspection: if the detectors are battery-only or past their replacement date, adding hardwired units with battery backup is a straightforward job that gets done in the same visit or a follow-up.
We'll sort out what the system needs and explain it clearly before any work is agreed.
We work across Rochester Hills and throughout Oakland County, including Troy, Auburn Hills, Pontiac, Clarkston, Lake Orion, Shelby Township, and Sterling Heights. The work covers residential and commercial properties: single-family homes, rental properties, multi-unit buildings, and small commercial spaces.
Homeowners call for repairs, upgrades, and new installs. Landlords and property managers call when a unit has an electrical fault that needs diagnosing before a tenant moves in or after a complaint. Small business owners call when a space needs additional circuits, a panel upgrade, or exterior lighting for a parking area. Built for homeowners. Ready for property managers. Ready for your panel.
No-pressure estimates, priced up front, is how every job starts. When you call, you describe the work or the symptom, and you get a rate before anything is put on the calendar. That price covers what was discussed, and if the scope changes once the work is underway, you're told before anything additional is done.
We're available every day from 9 AM to 8 PM. Ask what the schedule allows when you call, and we'll confirm a time. The same number you call to book the job is the number to call with any questions afterward.
We'll make your wiring safe again.
Oakland County's housing stock spans a wide range of ages, and the wiring inside an older home reflects that history. Knowing that knob-and-tube and aluminum branch wiring are common in this area shapes how we approach a diagnostic visit: we check for those wiring types before assuming a newer configuration and scope the job accordingly. That kind of area-specific knowledge changes what questions get asked on the call and what gets checked first on site.
Write down which outlets, switches, or breakers are affected, whether the problem is in one room or spread across the house, and whether anything changed before it started: a new appliance, recent storm activity, or a renovation. That detail helps us scope the work accurately on the call and arrive prepared for what the job involves.
We ask about the symptom or the scope, the panel location, and whether the issue is isolated to one circuit or affecting more of the house. For installation work, we ask about the panel capacity and the approximate run from panel to the new circuit or fixture. Those answers let us give you a price that reflects what the job actually involves.
Before any work starts, we explain what we found and what the repair or installation involves. If the scope changes once we are on site, we stop and explain why before continuing. You are not presented with a bill for work that was not discussed.
When you call, we go over the scope, the price, and the available time. You confirm the appointment before we schedule it.
If anything needs to change before the visit, call (248) 791-9979 and we will adjust.
Clear access to the panel and the affected circuits makes a real difference. If the panel is behind stored items or the work area is difficult to reach, letting us know on the call gives us a chance to plan for it. Having a description of the symptom ready and knowing the approximate age of the home also helps us arrive with the right materials for the job.
We diagnose first and explain what we found before recommending anything. If the job turns out to be smaller than the symptom suggested, the price reflects that. Estimates are no-pressure and priced up front, so there is no incentive to describe a bigger job than what is actually there.
Call us and describe what you are seeing. We will go over what was done and what the new symptom looks like to determine whether it is related to the original repair or a separate issue. We answer when you call.
Don't let a small wiring issue turn into a fire risk, and don't put off a panel upgrade because the process seems complicated. Rochester Hills Electrical Company is available every day from 9 AM to 8 PM.
Call (248) 791-9979 to describe the work, get a price, and schedule a visit.
We answer when you call. We explain the work. We leave it safe.
(248) 791-9979