Some electrical problems will not wait. A breaker that keeps tripping, an outlet that sparks, a panel that smells like something is burning - those calls go to the front of the line. Other jobs are planned work: a panel upgrade before a renovation, an EV charger circuit for a new vehicle, recessed lighting in a kitchen that has never had it. We take both kinds of call, and we handle them the same way. You get a price on the phone before anything is scheduled, and the visit covers what was agreed.
Eastpointe is a city of working homes, and the electrical needs that come with them are familiar to us. Homeowners dealing with aging wiring, landlords managing rental properties, businesses that need work done without shutting down the operation - we cover all of it.
Call (248) 791-9979 any day between 9:00 AM and 8:00 PM. We are open every day of the week.
Renovation work moves in a specific order, and the electrical portion of it has to land in the right place or it creates problems for everyone else. Rough-in wiring has to happen before drywall goes up. Panel capacity has to be confirmed before a contractor starts pulling permits for a kitchen addition. If the electrician is called in after the walls are closed, the job costs more and takes longer than it should have.
The most common sequencing problem on a remodel is treating the electrician as a finish trade when the work is actually rough-in. New circuits, outlet repositioning, and dedicated appliance feeds all have to be run while the framing is exposed. Calling us early in the planning stage means we can confirm what the panel can carry, identify whether a service upgrade is needed before the project starts, and give you a realistic scope before the drywall contractor quotes their work.
An addition changes the electrical load calculation for the whole house, not just the new square footage. A new bedroom, a finished basement, or a garage conversion each adds circuits that the existing panel may or may not have room for. We check the panel first, confirm the capacity, and tell you what the work involves before anything is opened up. If a subpanel makes more sense than running every new circuit back to the main panel, we explain why and what the difference means for the job.
We are open every day from 9:00 AM to 8:00 PM, and that window covers most of the situations people call about. When a problem will not keep, we treat it that way. A panel that is producing heat, an outlet that will not stop sparking, or a circuit that has gone dead in a room that needs to stay functional - those calls get handled as soon as the schedule allows, and we confirm availability on the phone.
For tenants and businesses that cannot go dark, we plan the visit around what the property actually needs. That might mean working on one circuit while another stays live, or scheduling the visit for a time when the space is not in full use. We talk through the logistics on the call and figure out what works before we commit to a time.
A price for electrical work is built from what the job actually involves. The fault itself, what has to be opened to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote up or down. A simple outlet replacement is a different job from tracing an intermittent fault across three circuits. A panel upgrade on a house that already has a 200-amp service entrance is a different job from one that needs the service entrance replaced as well.
No-pressure estimates, priced up front - that is how every call works here. You describe what you are seeing, we ask the questions needed to scope it accurately, and you get a number before anything is scheduled. If the scope changes once we are on site, we explain why before the work continues. Estimates are confirmed on the phone, not presented as a surprise at the end of the visit.
A house of a certain age carries wiring that was installed to the standards of its time. Those standards have changed, and some of what was acceptable then is a real problem now. Knob-and-tube wiring, aluminum branch-circuit wiring, and two-prong outlets without grounding are all common findings in older properties across Macomb County. None of them is automatically an emergency, but each one has limits that the modern electrical load in a typical home can push past.
Knob-and-tube wiring was not designed to be covered with insulation, and most of it was not designed for the loads a modern household puts on a circuit. When it is found in an attic or a basement wall, the question is not whether it should eventually be replaced but how much of the system it affects and what the replacement involves. Aluminum branch-circuit wiring from the period when it was commonly used in residential construction requires specific devices and connections at every termination point. Where those connections have not been maintained, the risk of a poor connection running hot is real. We assess what is there and explain the options before any replacement work is agreed.
Not every older house needs a full rewire. A targeted assessment tells us which circuits are carrying wiring that needs to come out and which are fine left alone. Arc-fault and ground-fault breaker upgrades can address specific protection gaps without replacing the wiring behind them. GFCI protection at kitchens, bathrooms, and outdoor circuits is a code requirement on any new or replaced outlet in those locations, and it is worth adding to older circuits that were never protected. We tell you what the inspection found and what, if anything, needs to happen next.
Commercial electrical work is planned differently from residential. A business that has to stay open during the visit needs a different approach than a house where the main breaker can come off for an hour. We talk through what has to stay live, what can be isolated, and how the work gets sequenced so the business is not down longer than necessary.
Out-of-hours scheduling is an option for properties where any interruption to normal operations is a problem. Panel work, circuit additions for new equipment, and lighting upgrades can often be scheduled for evenings or early mornings when the space is not in use. The scope and the price are confirmed before that visit is booked, so there are no decisions being made on the clock.
Electrical work here gets handled by people who answer to this community. When a commercial property has a fault that needs attention, the call reaches someone who can scope the job on the phone and confirm what the visit will involve before anyone shows up.
A ceiling fan installation is not always a straightforward swap. The electrical box in the ceiling has to be rated to carry the fan's weight and movement, and many older light fixtures were mounted on boxes that were never designed for it. We check the box before the fan goes up, upgrade it where needed, and handle the switch wiring so the fan and light can be controlled separately if that is what the room calls for.
Replacing knob-and-tube wiring means running new circuits through walls and ceilings that were built around the old system. The work is more involved than a standard rewire because the routing often has to be rethought entirely. We assess the extent of the system first, explain what replacement involves for the specific property, and give you a scope that covers the whole job rather than just the visible portion.
A service upgrade replaces the panel and, where needed, the service entrance to increase the capacity the house can carry. The trigger is usually a panel that has no room for additional breakers, a load calculation that shows the existing service cannot carry what is being added, or an older panel type that no longer meets current code. EV charger circuits, electric ranges, and added HVAC loads are common reasons a 100-amp service runs out of room.
A full rewire replaces the branch-circuit wiring throughout the house. A partial rewire addresses specific circuits or areas where the wiring has reached the end of its useful life. The scope depends on what the assessment finds. We do not recommend a full rewire where targeted replacement handles the problem, and we do not recommend targeted replacement where the wiring condition makes a full rewire the right answer.
The electrical side of a generator installation covers the transfer switch at the panel and the wiring that connects it to the generator connection point. The transfer switch is what keeps the home's circuits isolated from the utility line when the generator is running, which matters for safety during an outage. We handle the hookup and the switch installation. We are open to both manual and automatic transfer switch configurations depending on what the panel and the property call for.
A well pump runs on a dedicated circuit sized for its motor load, and that circuit has to be protected correctly for an outdoor or below-grade installation. Irrigation system circuits follow the same logic: a dedicated feed, proper GFCI protection where the circuit is exposed to moisture, and a connection point that is accessible for future service. We run the circuit and confirm the panel can carry the added load before the work starts. Each service is described in more depth on the full electrical services list.
We cover Eastpointe and the surrounding communities throughout Macomb County and the neighboring areas. That includes Harper Woods, Roseville, St. Clair Shores, Grosse Pointe Woods, and the Village of Grosse Pointe Shores. Residential and commercial calls from across this part of the region are welcome.
The work is the same whether the property is in Eastpointe or one of the towns around it: a price confirmed on the phone, a visit that covers what was agreed, and panel and wiring work finished to code. We'll make your wiring safe again.
The existing circuit may not be rated for the higher load. We check the circuit's amperage, the wiring gauge, and the breaker before connecting a new appliance that draws more than its predecessor. If the circuit needs to be upgraded, we explain what that involves and give you a price before any work starts.
Call us and describe what you are seeing. A returning fault often means the original symptom had a second cause that was not visible until the first one was corrected, and we will scope that follow-up on the call before scheduling a return visit.
Older homes in this part of Macomb County generate a steady mix of panel upgrade calls, knob-and-tube assessments, and GFCI protection updates on circuits that were never protected. We also take calls for EV charger circuits, generator hookups, and ceiling fan installations on houses where the existing box was not rated for a fan. If you are not sure whether your situation fits, call and describe what you are seeing and we will tell you what the job involves.
Yes. We serve Eastpointe and the surrounding communities throughout this part of the region, including Roseville, Harper Woods, St. Clair Shores, Grosse Pointe Woods, and the Village of Grosse Pointe Shores.
Call (248) 791-9979 to confirm coverage for your specific address if you are on the edge of the area, and we will let you know on the call.
We assess the transfer switch, the panel connection, and the wiring condition as part of the visit. An unsafe generator hookup, such as a backfeed connection without a proper transfer switch, is a hazard that we document and explain clearly. We give you a price for bringing it up to a safe configuration before any correction work starts.
We look at the panel's rated capacity, the current load it is already carrying, and the demand of the appliance being added. If the numbers leave adequate headroom, the new circuit can be added without a panel upgrade. If they do not, we explain what an upgrade would involve before any work starts.
Commercial kitchen equipment typically runs on dedicated high-amperage circuits, and the panel has to carry the combined load of the cooking equipment, refrigeration, ventilation, and lighting. We assess the panel capacity and the circuit requirements for each piece of equipment before any work starts.
If you are in Eastpointe or one of the communities nearby, call (248) 791-9979 between 9:00 AM and 8:00 PM, any day of the week.
We answer when you call. We explain the work. We leave it safe. Harper Woods, Roseville, St. Clair Shores, and the rest of the area around Eastpointe are covered too. Call now and get the quote on the phone.
Wiring and panel work nearby: Harper Woods, Roseville, St. Clair Shores, Fraser. Take a look at our area list.
Below is a plain-language look at the electrical work we handle across Eastpointe and Macomb County. Each row covers what the service involves, who it fits best, and one practical thing worth knowing before you call. Pricing is discussed on the call, before anything is scheduled, so you can make an informed decision without any commitment.
| Service Type | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgradeNew breaker box installationLoad calculation and service entrance workSubpanel installation for garages and additions | Older Macomb County homes adding EV chargers, heating circuits, or major appliances to an undersized 100-amp panel | Panel work is finished to code and covers the full service entrance where the incoming capacity needs to match the new box. A load calculation is part of every upgrade. |
| Outlet & Switch Installation | GFCI and AFCI outlet replacement240-volt outlet installationUSB and smart outlet wiringDimmer and smart switch compatibility | Homeowners adding outlets to a room, upgrading a kitchen or home office, or replacing outdated devices in older wiring | Older Michigan homes with aluminum or knob-and-tube wiring require specific devices and connections. We check what is in the wall before quoting the job. |
| Dedicated Appliance Circuits | Dryer and range circuit installationRefrigerator and dishwasher circuitsWorkshop and garage circuitsPanel capacity check before installation | Homeowners adding a major appliance or workshop equipment that requires its own circuit | Every dedicated circuit starts with a panel capacity check. If the panel is already full, that conversation happens before the circuit work is quoted. |
Call (248) 791-9979 to describe the job and get a price before anything is scheduled. We are open every day from 9:00 AM to 8:00 PM.
(248) 791-9979