Homes in Harrison Township were built across several decades, and the electrical systems in many of them reflect that history. Older wiring, original panels sized for a fraction of the current load, and circuits added over the years without always being documented are common findings when we open a breaker box or pull an outlet. That is not a criticism of the homes. It is simply what the housing stock here looks like, and it shapes what the work involves.
We handle electrical repairs, panel upgrades, circuit installation, and wiring work for homeowners and property managers across Harrison Township and the surrounding Macomb County area.
Whatever brought you here, call (248) 791-9979 and describe what you are seeing.
You get a price before anything is scheduled, and we are open every day from 9:00 AM to 8:00 PM.
A house built in the 1960s or 1970s was wired for a household that ran a refrigerator, a few lights, and maybe a window air conditioner. It was not wired for a home office, an electric range, a second refrigerator in the garage, and an EV charger all drawing at once. The panel that made sense then does not always have the capacity for how people live now, and that gap shows up as tripped breakers, lights that dim when an appliance kicks on, or a panel that is simply full with no room for a new circuit.
Aluminum branch-circuit wiring is another thing that turns up in homes from that era. It was used widely in the late 1960s and through the 1970s, and it requires specific devices and connections to remain stable over time. Knob-and-tube wiring appears in the oldest properties, sometimes still active and sometimes buried under insulation in a way that creates heat buildup. When we find either, we explain what is there and what the options are before any work begins. Panel and wiring work finished to code is the standard on every job, and that matters whether the goal is a repair, a renovation, or preparing a property for sale.
We answer when you call. We explain the work. We leave it safe.
Some of the most important wiring in a house is the hardest to reach. Attic runs, crawl space circuits, and wiring that passes through exterior walls or between floors all require planning before the job starts. Knowing what is accessible and what will need to be opened up changes the scope, and that is part of what gets worked out on the call before a price is given.
Recessed lighting installation, for example, involves more than cutting a hole in the ceiling. The circuit has to be traced back to the panel, the existing wiring in the ceiling cavity has to be assessed, and the box and trim have to be matched to the insulation contact rating of that particular space. We do that assessment as part of the job, not as a surprise after the fact.
Ceiling fans and fixtures in rooms with vaulted or high ceilings add a physical dimension to what is otherwise a straightforward installation. The box in the ceiling has to be fan-rated and properly braced for the load and movement, and the wiring configuration has to support independent control of the fan and the light if that is what the room needs. When the existing setup does not support the installation, we say so before we start.
Don't let a small wiring issue turn into a fire risk, especially in spaces that are harder to inspect regularly. An attic or crawl space that has not been looked at in years can hold wiring problems that a ceiling or wall outlet would have flagged much sooner.
A panel where half the breakers are unlabeled or mislabeled is a genuine problem, not just an inconvenience. When a fault develops on an unknown circuit, finding it takes longer and costs more. When a contractor or an inspector opens the panel, an undocumented layout raises questions. We trace circuits, label them accurately, and document what feeds what, which makes every future job on that property faster and cleaner.
A whole-home surge suppressor installed at the panel intercepts voltage spikes before they reach the branch circuits. That matters in a region where ice storms and wind events can send surges through the utility line, and it matters more as homes carry more sensitive equipment. A single event can damage appliances, electronics, and EV charging hardware across the whole house. Panel-level protection is the most complete answer, and it is worth discussing whenever the panel is already open for another job.
A welder, an air compressor, or a large shop tool draws a load that a standard household circuit was never designed to carry. Running a dedicated circuit for workshop equipment means sizing the wire and the breaker correctly for the starting and running draw of that specific machine, not just the nameplate rating. We also handle circuits for garages and detached outbuildings where a subpanel is a cleaner solution than running individual circuits back to the main panel.
An intermittent fault is the hardest kind to find. A breaker that trips once and then holds for weeks, an outlet that works most of the time, a light that flickers under load but not at rest. These point to real problems, including arc faults, loose connections, and wiring that has degraded at a specific point. Arc-fault and ground-fault breakers are part of the diagnostic toolkit here, and replacing a standard breaker with an AFCI device can confirm a fault that a visual inspection cannot locate. We trace the symptom to its source rather than replacing parts and hoping.
The wiring around here has its own patterns, and intermittent faults in older homes often trace back to the same few causes: loose aluminum connections, degraded insulation at a junction, or a breaker that has weakened over years of cycling.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a call, a clear scope, and a time that works. We take short-notice work when the schedule allows, and for situations that will not wait, ask what is available when you call and we will tell you what the nearest open slot looks like.
For tenants and businesses that need to stay operational, we work out the scope on the call and plan the visit around what the property actually needs. A rental unit that needs a circuit fixed before a tenant moves in, a small business that cannot lose power to a whole section of the building, a landlord managing multiple units across Macomb County, these are all situations we handle as a matter of course. You're talking to someone who knows the area and the homes in it, and the call is where the details get worked out.
We are open every day from 9:00 AM to 8:00 PM.
Call (248) 791-9979 and describe what is happening. We'll take care of the circuits from here.
Adding a circuit is straightforward when the panel has the capacity. When it does not, the conversation shifts. A 100-amp panel carrying a full modern load has no room for an EV charger circuit or a dedicated appliance run without something giving way. The question is whether a panel upgrade makes sense alongside the new circuit, or whether the load can be managed within the existing service.
We work that out with a load calculation before any work starts. That means adding up what the panel is currently carrying, accounting for the new load, and determining whether the service entrance can support an upgrade if one is needed. Subpanel installation is an option when the main panel is full but the service entrance has capacity. It adds a second breaker box for a specific area of the house or a detached structure without replacing the main panel. The right answer depends on what the property already has, and that is a conversation we have on the call.
Built for homeowners. Ready for property managers. Ready for your panel.
Pricing is based on what the job actually involves. The fault's location, what has to be opened up to reach it, the length of a wiring run, the condition of the existing panel, and whether the circuit or service can carry the change are all factors that move a quote in one direction or another. A straightforward outlet replacement is a different job from tracing an intermittent fault through a finished wall, and the price reflects that difference.
You get the rate on the call, before anything is scheduled. We ask the questions needed to scope the work accurately, and you decide before we come out. No-pressure estimates, priced up front, is how every job here works. If the scope changes once we are on site, we explain why before the work continues.
Electrical safety inspections follow the same approach. The price covers the panel, the wiring, the grounding and bonding, and the outlet and GFCI status throughout the property. What we find gets explained clearly, and any follow-up work is a separate conversation, not something that gets added without discussion.
Fast diagnosis. Pricing set out up front. Clean work. The specifics for a job like this are on our services page for electrical work.
We serve Harrison Township and the surrounding communities throughout Macomb County. That includes:
Residential and commercial electrical work across this part of Michigan falls within our service area. Whether the property is a single-family home, a rental unit, or a small commercial building, the same range of work applies. Call to confirm coverage for your specific address if you are on the outer edge of the area.
An inspection can be booked by someone who does not yet own the property, as long as access can be arranged. We cover the panel condition, wiring type, grounding, GFCI status, and visible code concerns, and the written report reflects what was found on the day of the visit.
Aluminum branch-circuit wiring does not automatically require immediate replacement, but it does require attention. The connections at outlets, switches, and the panel need to be made with devices rated for aluminum, and any that are not should be addressed. We assess what is there on the visit and explain what the actual risk level is before recommending any work. The right answer depends on the condition of the connections and the devices currently in place, and we will tell you what we find.
We describe each finding and explain which ones represent immediate safety concerns, which represent code deficiencies that should be corrected, and which are maintenance items to monitor. That breakdown lets the property owner make an informed decision about what to address first.
Yes. Let us know when you call who should receive the documentation and how. We confirm the details before the visit so the right people have what they need after the work is done.
Before the framing is closed, at the latest. Rough-in work needs to happen while the walls are open, and waiting until after drywall means cutting into finished surfaces to run wire. For a kitchen or bathroom renovation, we should be involved before the cabinet or fixture installers arrive so the circuit locations are confirmed in advance.
We handle electrical work across the range of residential and smaller commercial properties common in a town this size, including single-family homes, detached garages, rental units, and small business spaces. Older homes on original wiring and properties where circuits have been added over the years without documentation are common calls. Whatever the property type, the process starts the same way: a call, a scope, and a price before anything is scheduled.
A quote is based on what is visible and describable before the work begins. If we open a wall or a panel and find a condition that changes the scope, we stop and explain what we found before continuing. You agree to any change before additional work proceeds.
A breaker that trips under load but holds at other times is usually a sign that the circuit is being pushed close to its rated limit when multiple devices are running at once. It can also indicate a breaker that is weakening and no longer holds its rated amperage reliably. We check both the load and the breaker condition when this pattern is reported.
You do not need to know what is wrong before you call. Describing the symptom is enough. A breaker that keeps tripping, an outlet that stopped working, a light that flickers when a large appliance runs, a panel that hums or smells warm. That description is what we work from to scope the job and give you a price.
Call (248) 791-9979.
We are open every day from 9:00 AM to 8:00 PM. The price is confirmed before anything is scheduled, and the work does not start until you have agreed to it. Call Rochester Hills Electrical Company and tell us what you are seeing.
We are also in: Mount Clemens, Chesterfield Township, Fraser. Check our area list.
Below is a plain-language look at the electrical work we handle across Harrison Township, Macomb County and Macomb County. Each row covers what the service involves, who it fits best, and one practical thing worth knowing before you call. Pricing is discussed on the call, before anything is scheduled, so you can make an informed decision without any commitment.
| Service Type | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgradeNew breaker box installationLoad calculation and service entrance workSubpanel installation for garages and additions | Older Macomb County homes adding EV chargers, heating circuits, or major appliances to an undersized 100-amp panel | Panel work is finished to code and covers the full service entrance where the incoming capacity needs to match the new box. A load calculation is part of every upgrade. |
| Wiring & Circuit Installation | New circuit runs from the panelRewiring of older branch circuitsKnob-and-tube and aluminum wiring assessmentJunction box and connection updates | Homes with outdated wiring that cannot safely carry modern electrical loads, or properties adding new rooms or circuits | Knob-and-tube systems were never designed for today's loads. If your home has it, we assess what is there and explain your options before any work is agreed. |
| Dedicated Appliance Circuits | Dryer and range circuit installationRefrigerator and dishwasher circuitsWorkshop and garage circuitsPanel capacity check before installation | Homeowners adding a major appliance or workshop equipment that requires its own circuit | Every dedicated circuit starts with a panel capacity check. If the panel is already full, that conversation happens before the circuit work is quoted. |
Call (248) 791-9979 to describe the job and get a price before anything is scheduled. We are open every day from 9:00 AM to 8:00 PM.
(248) 791-9979