Electrical problems in a small city like Farmington rarely announce themselves loudly. A breaker that trips a few times a month, an outlet that stopped working in one room, a light fixture that flickers when the furnace kicks on. These are easy to put off, and they are the ones most likely to turn into something more serious if they sit. We handle electrical work across Farmington for homeowners and property owners who want the problem found, explained, and fixed without the runaround.
We are open every day from 9:00 AM to 8:00 PM. When you call, you reach someone who can scope the job on the phone and give you a price before anything is scheduled. That is how every call works, whether it is a single outlet or a panel that needs to be replaced.
Don't let a small wiring issue turn into a fire risk, and do not wait to find out whether the problem is minor. A dead outlet, a warm switch plate, a breaker that will not hold its position after being reset. Each of those is a symptom with a cause, and the cause is not always where you expect to find it.
We schedule visits around what the job actually requires. If the problem will not wait, call and describe what you are seeing. We confirm what the schedule allows and find the nearest open time. If a tenant is in the unit or a business has to stay open, we plan the work around that. Circuits can often be isolated so the rest of the property keeps running while we work on the affected area. We'll take care of the circuits from here.
Farmington has a mix of housing that spans several decades, and older homes carry wiring that reflects the standards and materials of the time they were built. When we find work that does not meet current code, the first question is always whether it is a safety issue that needs to come out now or a condition that can be documented and addressed in a planned way.
Knob-and-tube wiring and aluminum branch-circuit wiring both show up in this area's older housing stock. Neither is automatically an emergency, but both require specific handling. Aluminum wiring at the outlets needs the right devices and connections to remain stable. Knob-and-tube systems were not designed for today's electrical loads, and adding circuits to one without understanding what is already there is how problems start.
When we find prior work that was done without permits or does not match the panel labeling, we explain what is there and what it means before any repair begins. The goal is a clear picture of the system, not a list of things to alarm you with. Panel and wiring work finished to code is the standard every job is held to, and that applies to corrections as much as it does to new installations.
Some jobs require isolating a single circuit for an hour. A panel replacement or a service upgrade means the main power to the house comes off for part of the day. The difference matters, and we talk through it on the call.
For homeowners working from home, we plan the shutdown window around what the day actually looks like. For a business or a rental unit that has to keep running, we identify which circuits are critical and work the sequence around them where the job allows. The scope and the plan are settled before we arrive, so the day goes the way it was described.
We answer when you call. We explain the work. We leave it safe.
The wiring around here has its own patterns, and the faults that are hardest to find are the ones that do not show up on command. A breaker that trips on a Tuesday and holds fine for two weeks after. A circuit that loses power when it rains. An outlet that works until something large is plugged in, then fails under load.
Intermittent faults require a different kind of diagnostic work. The symptom is real, but reproducing it on demand is not always possible. That means reading the panel, checking connections at every point on the circuit, looking for moisture intrusion on outdoor runs, and testing under load conditions rather than at rest. Finding the cause is its own job before any repair can begin, and we treat it that way rather than guessing and replacing parts until something holds.
You're talking to someone who knows the area and the homes in it. That matters when the fault is not obvious and the circuit history is not documented. We'll sort the wiring and clean up after. Each service is described in more depth on the services page.
The situation that leads to this call is usually a combination of things: not enough outlets where they are actually needed, two-prong receptacles in a room that requires three-prong or GFCI-protected outlets, or a switch that has been running warm. We install standard, GFCI, and AFCI outlets, replace outdated receptacles, and add outlets where running an extension cord has become the workaround. Switch and dimmer replacements are part of this work, including three-way configurations and smart switch wiring where the existing wiring supports it.
An older panel that is full, running warm, or producing a burning smell is a reason to call before it becomes an emergency. Panels in homes built several decades ago were sized for the loads of that era, and a modern household with an electric dryer, a home office, and an EV charger can push one past what it was designed to carry. We handle panel replacements and service upgrades, including load calculations to confirm the new panel is sized for what the property actually needs. Dedicated circuits for appliances and EV chargers are a natural part of this work.
An inspection is useful before buying a home, before listing a rental, or when a property has not had a formal review in several years. It covers the panel condition, wiring type, grounding and bonding, GFCI and AFCI status, and any visible code concerns. The report gives a clear picture of what the system contains and what, if anything, needs attention. Landlords and property managers use these before a tenancy starts or when a tenant reports a problem that points to something larger.
A panel where half the breakers are unlabeled or mislabeled is a problem that slows down every job that follows. It also makes it harder to isolate a circuit safely when something goes wrong. We trace and label circuits accurately, which means testing each one under load rather than reading what a previous owner wrote. An accurate panel directory is a practical thing that makes every future repair faster and safer.
A full rewire is the right answer when the existing wiring has reached the end of its useful life: deteriorating insulation, knob-and-tube throughout the house, or a system that cannot safely carry what the home needs. Partial rewiring addresses specific areas, a kitchen that needs updated circuits for modern appliances, a basement that was finished without permits, or a room where the wiring does not match what the panel shows. We assess what is there before quoting the work, so the scope is based on what the job actually involves.
Electrical pricing depends on what the job actually involves. The fault location, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change are the things that move a quote. A straightforward outlet replacement is a different conversation from a panel upgrade that requires a load calculation and a service entrance update.
When you call, we ask the questions needed to scope the work accurately. You get the price on the call, before anything is scheduled, and you hear what it covers. No-pressure estimates, priced up front. If the scope changes once we are on site, we explain why before the work continues. The price is confirmed before we begin, and you decide before we come out.
We serve Farmington and the surrounding communities throughout Oakland County. That includes Farmington Hills, Livonia, Novi, Franklin, and the wider area. Residential properties, rental units, and small commercial buildings across the area are all within our range.
Whether the call is for a single-family home, a multi-unit rental, or a commercial space, the same range of electrical work applies. Call to confirm coverage for your specific address if you are on the outer edge of the area we serve. We're ready to get your circuits working again.
Temporary power involves a connection from the panel or a temporary service, appropriate wiring protection for an outdoor installation, and the right outlet configuration for the equipment being powered. We scope the load requirements and the connection point on the call. Temporary installations are treated with the same attention to protection and grounding as permanent work.
Homes built several decades ago tend to need GFCI and AFCI protection added to circuits that predate those requirements, panel upgrades to handle modern loads, and outlet replacements where two-prong receptacles are still in place. Knob-and-tube and aluminum branch-circuit wiring show up in this area's older housing stock, and both require specific handling when repairs or additions are planned. Call and describe what you have, and we will tell you what the job involves.
An unlabeled panel is worth having traced and documented before you need it in an emergency. We test each circuit under load and label the panel accurately, which makes every future repair faster and safer. It also makes it possible to isolate a single circuit without shutting down more of the house than necessary. Call to schedule that work as a standalone job or alongside any other electrical visit.
The next step is a phone call. Describe what you are seeing or what you need, and we give you a price before anything is scheduled. We are open every day from 9:00 AM to 8:00 PM.
Call (248) 791-9979 and get the scope and the rate on the first call.
Fast diagnosis. Pricing set out up front. Clean work.
Just as close, we take electrical work in: Walled Lake, Lathrup Village, Keego Harbor. Check our area list.
Below is a plain-language look at the electrical work we handle across Farmington and Oakland County. Each row covers what the service involves, who it fits best, and one practical thing worth knowing before you call. Pricing is discussed on the call, before anything is scheduled, so you can make an informed decision without any commitment.
| Service Type | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Lighting Installation | Recessed and under-cabinet lightingExterior security and motion sensor lightsLandscape lighting circuitsCircuit sizing for multi-fixture runs | Homeowners adding interior lighting or improving outdoor security lighting around the property | Load calculation before pulling wire keeps the circuit from nuisance tripping once all fixtures are running. |
| Electrical Panel & Service Upgrades | 200-amp service upgradeNew breaker box installationLoad calculation and service entrance workSubpanel installation for garages and additions | Older Oakland County homes adding EV chargers, heating circuits, or major appliances to an undersized 100-amp panel | Panel work is finished to code and covers the full service entrance where the incoming capacity needs to match the new box. A load calculation is part of every upgrade. |
| Wiring & Circuit Installation | New circuit runs from the panelRewiring of older branch circuitsKnob-and-tube and aluminum wiring assessmentJunction box and connection updates | Homes with outdated wiring that cannot safely carry modern electrical loads, or properties adding new rooms or circuits | Knob-and-tube systems were never designed for today's loads. If your home has it, we assess what is there and explain your options before any work is agreed. |
Call (248) 791-9979 to describe the job and get a price before anything is scheduled. We are open every day from 9:00 AM to 8:00 PM.
(248) 791-9979