Planning an addition, finishing a basement, or adding a major appliance to a Romeo property means thinking about the electrical side before the walls go up or the new equipment arrives. A panel that was sized for a smaller load, a circuit that was never run to the right location, or wiring that predates the current code can all stop a project before it starts. We handle that planning work the same way we handle a repair call: figure out what the job actually involves, give you a price on the phone, and schedule the visit from there.
We cover Romeo and the surrounding Macomb County area for the full range of residential electrical work.
Whether you are preparing a property for a renovation, dealing with a fault that showed up overnight, or adding circuits for equipment that was not there when the house was built, call (248) 791-9979 and we will scope it on the call.
A generator is only as useful as the wiring that connects it to the house. The transfer switch is what keeps the generator and the utility line from feeding each other at the same time, which matters for safety and for the utility workers on the line during an outage. We handle the wiring from the generator connection point to the transfer switch and through to the panel, and we size the hookup for the circuits you actually need to run. Portable generator setups and standby configurations are both options, and the right one depends on what the panel can carry and what loads you want covered.
A detached garage or a workshop that was built without its own electrical supply is a common situation in a town where properties often include outbuildings. Running a subpanel to a detached structure means the garage can carry lighting, outlets, a compressor, and a charger without pulling all of that back through a single long circuit to the main panel. Electric gate operators need a dedicated circuit and weatherproof wiring at the post, and we handle both the circuit and the connection point as part of the same job.
Lighting work covers more than swapping a fixture. Recessed lighting in a kitchen or living area involves cutting to the right box, confirming the circuit can carry the load, and making sure the layout actually lights the space rather than just filling the ceiling. Under-cabinet lighting in a kitchen, dimmer installation in a dining room, and pendant fixtures over an island all involve wiring that has to be right before the fixture goes on. We check what is already in the ceiling or wall before committing to a scope, because what is there changes what the job involves.
A full rewire replaces the branch circuit wiring throughout the house, from the panel to every outlet, switch, and fixture. That is the right call when the existing wiring is a type that cannot safely carry modern loads, or when the insulation has deteriorated to the point where it is a risk rather than a protection. A partial rewire targets specific circuits or areas, which makes sense when the problem is contained. We do a proper assessment before recommending one over the other, and we explain the reasoning before any work starts. We'll make your wiring safe again.
Romeo is a town with a real housing stock of older properties, and the wiring in those homes reflects when they were built. Knob-and-tube wiring turns up in the oldest houses, and it was designed for loads that bear no resemblance to what a modern household draws. The conductors themselves are often still intact, but the insulation around them can be brittle, and the system was never designed to be grounded. That matters when you add outlets, install a dishwasher, or extend a circuit.
Aluminum branch-circuit wiring is a different situation. It was used in a particular era of residential construction and is still present in many homes across this part of Michigan. The wiring itself is not automatically a hazard, but it requires specific devices and connection methods to remain stable over time. Standard copper-rated outlets and switches are not the right fit, and improper connections at those points are where the real risk lives.
The wiring around here has its own patterns, and what we find during a diagnostic or an inspection shapes what we recommend. Panel and wiring work finished to code is the standard for every job, which means we do not just address the symptom. We look at what the existing system can carry and what it needs to carry safely going forward. Arc-fault and ground-fault breakers are part of that picture, and we install them where the work and the code call for them.
A fault that takes out part of the house is not something most people can leave for a week. When a call comes in for something that will not keep, we find the nearest available slot and confirm it on the call. You hear what the schedule allows and what the visit will cover before anything is booked. No commitment is required to get that information.
Landlords and property managers in Romeo call for repair work, safety inspections, and panel assessments on occupied units. The job still gets scoped and priced the same way, and the visit is arranged around what access is available. If the tenant needs to be present or the work has to happen in a specific window, that conversation happens when you call, not on the day of the visit.
We are open every day from 9:00 AM to 8:00 PM. Electrical work here gets handled by people who answer to this community. When you call, you reach someone who can scope the job on the phone and tell you what the visit involves before it is scheduled. We're ready to get your circuits working again.
The cost of an electrical job depends on what the job actually involves. A straightforward outlet replacement and a panel upgrade are not the same conversation, and the quote for each reflects what has to happen to do the work correctly.
What moves a quote is the fault itself, what has to be opened up to reach it, and whether the existing circuit or panel can carry what is being added. A circuit that needs to be extended from a panel with no room left is a different job from one where a spare breaker slot is already available. We ask the right questions on the call to understand which situation applies before we give a number.
No-pressure estimates, priced up front. You get the rate before anything is scheduled, and you decide from there.
Call (248) 791-9979 and describe what you are dealing with, and we will tell you what it costs.
Recessed lighting, dimmer-compatible fixtures, and kitchen task lighting are the most common indoor requests. The jobs that are worth doing at the same time as other work are the ones that involve the same walls or the same circuits. If a panel upgrade is already open, adding a dedicated circuit for a new lighting run at that point costs less than coming back for it separately.
Exterior lighting covers security lights, motion-sensor fixtures at entries and driveways, and lighting for detached garages and outbuildings. Outdoor circuits require weatherproof wiring and GFCI protection at every outlet, and we confirm that is in place whether we are installing new fixtures or replacing existing ones. Surge protection at the panel is worth discussing alongside any outdoor lighting work, since outdoor circuits are more exposed to voltage events than interior ones. We'll take care of the circuits from here. A quick read of our wiring and panel services page covers the rest.
We cover Romeo and the communities around it throughout Macomb County. That includes Bruce Township, Washington Township, Ray Township, Armada, and Leonard. Residential properties, rental units, and outbuildings across that area are all within our service range.
Electrical safety inspections, panel upgrades, generator hookups, and repair calls are handled the same way regardless of which town the property is in.
Call (248) 791-9979 and tell us where you are and what you need. We'll sort the wiring and clean up after.
In some cases, yes. A phased rewire works room by room or section by section, which can reduce the disruption on any given day. We assess the property's layout and the condition of the existing wiring before confirming whether a phased approach is practical for that specific job.
Older homes in a town this size tend to generate calls about aging wiring, panels that were not sized for current loads, and outbuildings that need a proper electrical supply. Generator hookup requests are common here, particularly after a regional storm knocks out power for more than a day. We handle all of it, and the scope gets confirmed on the call before the visit is booked.
Yes. We serve Romeo and the surrounding area, including Bruce Township, Washington Township, Ray Township, Armada, and Leonard. The same range of electrical work applies across all of those communities.
Call (248) 791-9979 and confirm your address when you reach us, and we will let you know what the schedule looks like for your area.
When you call, we ask what you are dealing with, where the property is, and what the panel situation looks like. By the end of that call, you know what the job involves, what it will cost, and when we can be there.
Call (248) 791-9979 daily from 9:00 AM to 8:00 PM.
We answer when you call. We explain the work. We leave it safe.
Also serving: Bruce Township, Ray Township, Armada, Addison Township, New Haven. Take a look at our area list.
Below is a plain-language look at the electrical work we handle across Romeo and Macomb County. Each row covers what the service involves, who it fits best, and one practical thing worth knowing before you call. Pricing is discussed on the call, before anything is scheduled, so you can make an informed decision without any commitment.
| Service Type | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgradeNew breaker box installationLoad calculation and service entrance workSubpanel installation for garages and additions | Older Macomb County homes adding EV chargers, heating circuits, or major appliances to an undersized 100-amp panel | Panel work is finished to code and covers the full service entrance where the incoming capacity needs to match the new box. A load calculation is part of every upgrade. |
| Electrical Repairs & Troubleshooting | Dead outlets and tripped GFCI devicesFault tracing at the panel and circuit levelBurning smell and heat diagnosisFlickering light and power loss investigation | Any homeowner or property manager dealing with an active electrical problem | We read the panel and trace the fault to its source before quoting any repair work, so you are not paying to replace parts that are not the cause. |
| Breaker & Fuse Repair | Breaker replacement and testingFuse panel assessmentCircuit load evaluationAFCI and GFCI breaker upgrades | Homes where a breaker trips repeatedly or will not hold its position after reset | A breaker that keeps tripping under normal loads is signaling a fault or an overloaded circuit, not just a nuisance. We confirm which before any hardware is swapped. |
Call (248) 791-9979 to describe the job and get a price before anything is scheduled. We are open every day from 9:00 AM to 8:00 PM.
(248) 791-9979